67
11
11
Before scanning 11
To use the machine as a scanner, install a scanner driver. If the machine is on a network,
configure it with a TCP/IP address.
Install the scanner drivers from the CD-ROM. (See Quick Setup Guide: Install MFL-Pro Suite.)
Configure the machine with a TCP/IP address if network scanning does not work.
(See Software User’s Guide: Configuring Network Scanning for Windows
®
.)
You can download the scanner driver without the Brother ControlCenter from the Brother
Solutions Center at http://solutions.brother.com/
.
How to scan to a computer 11
To Next Page
Loading...
Need help?
General
