Chapter 5
42
To set the Receive Mode, follow the instructions below:
a Press (Settings).
b Press s or t on the Touchpanel to display Initial Setup.
c Press Initial Setup.
d Press s or t to display Receive Mode.
e Press Receive Mode.
If you cannot change the Receive Mode, make sure the Distinctive Ring feature is set to Off.
(See Turning off Distinctive Ring on page 49.)
f Press s or t to display Fax Only, Fax/Tel, External TAD or Manual, and then press
the option you want to set.
g Press .
The Touchscreen will display the current Receive Mode.
To Next Page
Loading...
