USING P-TOUCH SOFTWARE
41
Using P-touch Software
USING P-TOUCH SOFTWARE
This P-touch is equipped with a USB port, allowing you to connect it to a computer. You will
need to install P-touch Editor and the printer driver to use your P-touch with your computer.
If you use Windows
®
, install P-touch Editor, the printer driver, P-touch Update Software,
P-touch Transfer Manager and the Printer Setting Tool from the enclosed CD-ROM.
If you use a Macintosh, you can download the driver, software and manuals by visiting the
Brother Solutions Center at http://solutions.brother.com/
Please visit the Brother Solutions Center (http://solutions.brother.com/
) for the latest
compatible OS.
Features
System Requirements
Before installation, check that your system configuration meets the following requirements.
Using P-touch Software
P-touch Editor Makes it easy for anyone to create a wide variety of custom labels in
complex layouts by using fonts, templates, and clip art.
Printer Driver Lets you print labels from the connected P-touch when using P-touch
Editor on your computer.
P-touch Update
Software
The software can be upgraded to the latest version.
P-touch Transfer
Manager
Allows you to transfer templates and other data to the printer and
save backups of your data on the computer.
(Windows
®
only.)
OS Windows
®
Windows Vista
®
/Windows
®
7/Windows
®
8/Windows
®
8.1
Microsoft
®
Windows Server
®
2008/2008 R2/2012/2012 R2
Macintosh OS X v10.7.5/10.8.x/10.9.x
Hard disk Windows
®
Disk space: 70 MB or more
Macintosh Disk space: 500 MB or more
Memory Windows
®
Windows Vista
®
/Windows Server
®
2008/2008 R2/2012/
2012 R2:
512 MB or more
Windows
®
7: 1 GB or more (32-bit) or 2 GB or more (64-bit)
Windows
®
8/Windows
®
8.1:
1 GB or more (32-bit) or 2 GB or more (64-bit)
Macintosh OS X v10.7.5: 2 GB or more
OS X v10.8.x: 2 GB or more
OS X v10.9.x: 2 GB or more
Monitor Windows
®
SVGA, high colour or higher graphics card
Macintosh 256 colours or more
Others CD-ROM drive
To Next Page
Loading...
