To Next PageTo Next PageWhy is the screen blank on my Brother Label Maker?
If the display on your Brother Label Maker remains blank after turning it on, check that the batteries are correctly installed and that the AC adapter (designed exclusively for your device) is properly connected. Also, ensure that the rechargeable Li-ion battery is fully charged.
How to unlock Brother P-touch E550W?
If the screen on your Brother Label Maker 'locks' or becomes unresponsive, reset the internal memory to its initial settings. If resetting doesn't resolve the issue, disconnect the AC adapter and remove the batteries for more than 10 minutes.
What to do if ink ribbon separated from ink roller in Brother P-touch E550W Label Maker?
If the ink ribbon is broken, replace the tape cassette. If the ribbon isn't broken, leave the tape uncut, remove the tape cassette, and wind the loose ink ribbon onto the spool.
How to improve barcode readability on Brother P-touch E550W?
To improve the readability of bar codes printed with your Brother Label Maker, align the bar codes with the print head. Also, consider using a different scanner. It's recommended to print bar codes with the [Standard] option selected for [Quality].
How to find firmware version on Brother P-touch E550W?
To find the firmware version on your Brother Label Maker, press the Menu key, select “Version Info.” using the arrow keys, and then press the OK or Enter key.
What to do if my Brother Label Maker says 'Insert Tape Cassette!'?
If your Brother Label Maker displays the message 'Insert Tape Cassette!', it means there is no tape cassette installed when you are trying to print or preview a label, or feed tape. To resolve this, install a tape cassette before continuing.
What to do if my Brother P-touch E550W says 'Recharge Li-ion Battery!'?
If your Brother Label Maker displays the message 'Recharge Li-ion Battery!', it means the battery is low. Please charge the lithium-ion battery.
What does 'Wrong Type Of Adapter Connected!' mean on my Brother Label Maker?
If your Brother Label Maker displays 'Wrong Type Of Adapter Connected!', it means an incompatible AC adapter is connected. To fix this, use an appropriate AC adapter.
General| Print Technology | Thermal transfer |
|---|---|
| Maximum Tape Width | 24 mm |
| Connectivity | Wi-Fi, USB |
| Display | LCD |
| Keyboard | QWERTY |
| Print Resolution | 180 dpi |
| Print Speed | 30 mm/sec |
| Label Width | 3.5 mm - 24 mm |
| Power Source | AC Adapter |
| Cutter | Automatic |
| Weight | 1.05 kg |
