Maintenance
64
11
3 Remove the DK Roll.
Be sure to remove the DK Roll before cleaning the roller. The roller cleaning function will not operate
correctly if the DK Roll is not removed.
4 Remove Part (B) of the Cleaning Sheet. Insert edge (A) of the Cleaning Sheet into the printing units.
The printed side of the Cleaning Sheet should be facing upwards.
5 Close the DK Roll Compartment Cover and turn on the printer.
6 Press the Feed ( ) Button for more than one second.
The Cleaning Sheet is ejected.
The adhesive face of the Cleaning Sheet removes any stains or dust on the roller.
• If the Cleaning Sheet is not ejected, press and hold the Feed ( ) Button until the Cleaning Sheet is
ejected.
• Dispose of the Cleaning Sheet after use.
To Next Page
Loading...
