BRUEL & KJAER 2032 - 86: Display 1;0 Status; 87: CR and Terminator; 88: Dump-Plot Format

12.7.6. 86: Display 110 Status
See the 2032 main IEC Interface Manual for details.
12.7.7. 87: CR and Terminator
When Special Parameter 87 is set to 1, the 2032 outputs carriage return (CR) prior to
the selected Interface Terminator. This enables, for instance, output of data to an
Alphanumeric Printer Type 2312.
12.7.8. 88: Dump-Plot Format
Special Parameter 88 allows the format of the "Dump-Plot" job to be altered from the
format intended for the Graphics Printer Type 2313 to another format. The parameter
value can be set to 0 or 1.
0: Graphics Printer Type 2313
1: HP 9876 A and HP 2671 G
145