BRUEL & KJAER 2032 - The Main Cursor

5.4.2. The Main Cursor
Main Cursor
Fig.5.22. The Main Cursor Control Fields
The Main Cursor is used to read X and Y in whichever units as are defined by the X
and
Y scaling. Adjustment of the cursor position is via the X field.
MAIN Y: XXX
x:D
When Time A vs. B, Nyquist, or Nichols plot is displayed, the X field changes to time or
frequency, as appropriate. Adjustment of the cursor position is then via the F or T
field.
MAIN Y: XXX
For T:D
X: XXX
81