BRUEL & KJAER 2032 - The Harmonic Cursor

5.4.3. The Harmonic Cursor
82
Harmonic Curcor
Fig.5.23. The Harmonic Cursor Control Fields
The Harmonic Cursor is used to identify sets of harmonics in frequency domain func-
tions. The fundamental can be selected via the X field and the DISPLAY "Set Special
Cursors" pushkey, see Section 4.2.3. Up to 128 Harmonic Cursors will be displayed.
The harmonic spacing may be adjusted in steps of ~ F /32 via the ~X field, (~ F equals
the line spacing).
HARM Y: XXX
x:D
~x:D