2.
INSTALLATION AND GROUNDING CONSIDERATIONS
2.1. INSTALLATION
2.1.1. Environment
2.1.2. Mounting
The Dual Channel Signal Analyzer Type 2032 is designed
to
be operated in
environ-
ments with temperatures
of
from
+soc
to
+ 40°C, and a relative
humidity
of
up
to
90%, (non condensing, +soc
to
+ 30°C). To prevent possible overheating, the supply
of
cooling
air
to the air-vents on the
right
hand side
of
the analyzer as well as the
exhaust vents on the rear
must
be unimpeded.
The
2032 can be used free standing on a bench,
or
can be adapted
for
mounting in a
19"
rack using Rack Mounting Flanges
Kit
KS
0027. The flanges may be attached as
follows:
1.
Disconnect all
power
supplies
from
the 2032 before removing its
protective
pan-
els.
2.
Slide
out
the
bottom
panel
of
the 2032 cabinet about S em and unclip the plastic
retaining clips
to
be found
at
the
front
of
the lower edges
of
the 2032.
3.
The
covers
retained by the
clips
may now be slid
out
to
expose the rack mounting
points
of
the 2032, shown in Fig.2.1.
4.
Screw on the Rack Mounting Flanges
KS
0027. Power
to
the 2032 may only be
reconnected when the
bottom
panel
of
the 2032 is back in place.
Location
of
rack
mounting
pointsL----_____:~:,&.j
on the 2032
Fig.2.
1.
Points
for
attaching
rack
mounting
flanges
9
To Next Page
Loading...
