BRUEL & KJAER 2032 - Using the 2032

3.6. USING THE 2032
22
The
basic operating principle behind the 2032 is that the user should make as much
use as
possible of the library of stored MEASUREMENT and DISPLAY SETUPS. In this
way, the
number of pushkey operations used is minimised. A complete measurement
process can be summarised as follows:
1. Choose the MEASUREMENT SETUP
Setup Label
Measurement
2. Choose the Optimum Input Sensitivity
Input
Aut orange
3. Start the Measurement via RECORD and AVERAGING CONTROL
..--- Control ---.,
Averaging
Start Proceed
Stop
Ill
.-----Record------,
Cont .
Single
Stop
Ill
ID
a