Need help?Do you have a question about the BRUSTOR B200 and is the answer not in the manual?
General| Type | Awning |
|---|---|
| Fabric type | Acrylic |
| Operation | Motorized |
| Material | Aluminum frame, Acrylic fabric |
| Weight | Varies depending on size and options |
| Assembly Required | Yes |
Details placement of supports for standalone configurations, including dimensions for pole support, ground anchor, and floorplate.
Instructions for wall-mounted configurations, specifying dimensions and offsets for single and couple setups.
Details on attaching cross members to vertical poles for single unit installations.
Specific instructions for securing cross members in a two-part roof configuration.
Instructions for connecting coupling profiles and aligning door profiles for couple and door configurations.
Guidance on ensuring the top side of the construction is perfectly level using lasers or levels.
Instructions for checking and adjusting perpendicularity using dimensions and diagonals.
Steps for routing and securing the louvre motor cable for single unit installations.
Guidance on routing the motor cable for two-part roof configurations, considering wiring box position.
Instructions for preparing louvres with water guides and fixing the first louvres to main housings.
Procedure for placing louvres in provided holes, ensuring longest axles are highest and pressing axles into holders.
Detailed steps for positioning movable louvreholders, programming the motor, and installing final louvres.
Guidance on routing cables for LED strip louvres and connecting covers onto louvreholders.
Steps for installing rollertubes, including starting with the longest distance from the electrical supply and drilling gaskets.
Details on fixing rollertube supports on vertical poles and tilting/securing screens for couple and door profiles.
Instructions for routing motor cables, hiding them behind PVC protection, and potentially behind the rollertube.
Steps for mounting plastic guides, placing the leadrail on top of the screen, and securing them with screws.
Procedure for sliding the leadrail into PVC guides, attaching the fabric zipper, and securing the cover.
Guidance on installing corner pieces in vertical poles for rain gutters, noting drain placement and roof in 2 parts requirements.
Steps for turning rain gutters into position, ensuring gasket integrity, and screwing corner pieces.
Instructions for placing necessary parts at each draining point for the rain gutter system.
Procedure for placing reinforcement in vertical poles, sliding it down for rain sensors, and using a longer bolt for cover housing.
Steps for screwing the rain sensor onto its support, routing the cable, and placing it high within the pole.
Instructions for placing covers on vertical poles and securing them with a top cover, noting orientation and rain sensor exclusion.
Guidance on placing the extension on the rain gutter, specifically on the motor side of the B200 + B200XL.
To Next Page
