Bryant Evolution Connex Control SYSTXBBECC01-C User Manual

10
3.1.3. Enable Time Synchronization
After setting up the time zone, the time synchronization can then be done,
after connection to the Internet server. Both setting the time zone and
enabling time synchronization must be done in order to enable time
synchronization.
3.2. Set Dealer Information for Series B
From the main screen, touch MENU, on the bottom of the control, then
Down (▼) button so that the SERVICE icon is shown. The SERVICE
icon allows you to upload your contact information into the Evolution
Connex Control.
A170243B
• Format your contact information and logo (if applicable) using the
PC/MAC Desktop application available at
www.MyEvolutionConnex.Bryant.com, and save it to a standard
micro SD card. See Dealer Logo Section for more information.
• Touch the SERVICE icon for about 10 seconds, touch DEALER
LOGO UPLOAD.
• Place the micro SD card into the micro SD card slot on the bottom of
the Evolution Connex Control and follow the on screen prompts.
• More detailed information can be found on HVACPartners.com under:
Products and Dashboards > Product Catalog > Residential Controls >
Systems Controls >SYSTXBBECC01-B> Documents > Marketing >

Bryant Evolution Connex Control SYSTXBBECC01-C Specifications

General

Brand	Bryant
Model	Evolution Connex Control SYSTXBBECC01-C
Category	Thermostat
Language	English