34
• Install Settings: Reset installation settings back to pre-programmed
values.
• Last 10 Events: Reset the last 10 system events under the Service
menu.
A190397
6.3.1.5. Scheduling On/Off
This option lets the installer allow comfort schedule programming
features. After the selection is made, touch SAVE.
• Scheduling: On or Off. Default = On
6.3.1.6. Smart Recovery On/Off
NOTE: ”Smart Recovery” refers to transitions between and among the
Home, Sleep and Wake modes. Moving from the Away mode to any
other mode is covered by the “Advanced Smart Setback” feature.
Smart Recovery applies to programmable operation only. Smart
Recovery causes the system to ramp the system target setpoints to those
for the next programmed schedule period to help save energy during
period transitions. Smart Recovery will start recovery 90 minutes prior to
schedule change in both heating and cooling mode. After the selection is
made, touch SAVE.
To Next Page
Loading...
Need help?
General
