68
6.5.10. Model/Serial Numbers
This menu item allows the installer to view the model number, serial
number (if available), and control software version (if available) of all
communicating pieces of equipment in the system, including the wall
control. This information resides in the original equipment circuit
board(s) from the factory. If an equipment circuit board has been
replaced, the model and serial number will no longer be displayed. To
return to the previous screen, touch BACK. To exit the Service menus,
touch DONE.
A14230
6.5.11. Service Phone Number
This menu item allows the installer to view the name and phone number
that the homeowner can call for future service of the system. This name
and phone number will appear to the homeowner whenever a service
reminder pop-up message is displayed (i.e. Change Filter, etc.). The
contact number can be changed under the dealer system menu. To return
to the previous screen, touch BACK. To exit, touch DONE.
6.5.12. Energy Tracking
NOTE: Energy Tracking is only available for applicable equipment. See
The Product Data for the equipment in question to see if Energy Tracking
To Next Page
Loading...
Need help?
General
