73
to properly format the dealer logo and contact information for use on the
wall control.
Along with the dealer logo (if any), three lines of dealer information are
provided on the wall control:
Dealer name (50 characters, max)
Dealer phone number (20 characters, max)
Dealer URL (50 characters, max)
The wall control dealer information display is 30 characters wide. Dealer
names and URLs over 30 characters will be split into two lines on the
display.
The PC/MAC Desktop application to format the dealer logo and contact
information can be found at:
www.MyEvolutionConnex.Bryant.com
Download the program and follow the program instructions.
Once the dealer logo and contact information have been properly loaded
onto the micro SD card, insert the micro SD card into the bottom edge of
the Evolution Connex Control. The control will prompt you whether or
not to upload the dealer logo. Once complete, you will receive a
confirmation that your upload was successful. If the information was not
stored properly on the micro SD card, you will receive an error message
that the dealer logo was not found. Refer back to the PC/MAC Desktop
application instructions and try again. Once the upload is complete, touch
NEXT.
If you have problems, contact your distributor service manager for
support.
To Next Page
Loading...
Need help?
General
