77
A13237
• If a Wi-Fi network security key is shown as on the right hand picture
above then select the white bar and enter the security key, then select
NEXT.
• Touch in the security key area, and the keyboard will appear.
– Use the on screen keyboard to enter the Wi-Fi network security key,
then touch NEXT.
• The control will inform you if the connection is successful. If so,
touch DONE.
– If the connection is unsuccessful, verify that the proper information
has been entered before you touch RETRY. The control will go
through the process again.
A13238
• After the control has connected to the network, go to
www.MyEvolutionConnex.Bryant.com to register the unit or you can
use the Bryant® Home mobile app to begin remote access. This
To Next Page
Loading...
