If you need some help, call us on 0800 145 6789* or go to bt.com/producthelp
34
Call control settings
Assign VIP status to a contact
You can assign VIP status to any of your contacts which means when Do not
disturb is switched on, these calls will ring through as normal. The default Do
not disturb setting is Allowed. If set to Allowed, calls from VIPs will ring as
normal, if set to Barred, all calls including the VIPs will ring silently, see page
32. You can also still make calls to VIP contacts when Outgoing Call Control
is switched on.
1. In idle mode, press
.
2. Enter the access PIN and select OK. Press
to highlight VIP list and
pressSelect.
3. Read the prompt and select Info, read the message and select Yes at the
end. Your contacts list will be displayed.
4. To assign contacts as VIP, highlight the contact and press
.
Selectadditionalcontactsifrequiredbyrepeatingabove.
5. Select Options, Add selected will be highlighted, press
OK and the
selected entries will be added to your VIP list.
If you’ve already added contacts to your VIP’s, the list will be displayed
when you enter the VIP list menu. You can then select
Options to add
further VIPs, remove VIPs or assign a VIP ringtone.
To Next Page
Loading...
Need help?
General
