BT BT8610 - Clock;Alarm; Set the Time and Date; Set an Alarm

If you need some help, call us on 0800 145 6789* or go to bt.com/producthelp
49
Using the phone
Clock/Alarm
Set the time and date
1. Select Menu, scroll
to display Clock/Alarm and press Select.
2. Press
to highlight Time and date and press Select.
3. Enter the digits for the time, (you will also need to select AM or PM
if 12 hour format has been set using
or ). Then press
and
enter the date. Select Save.
Set an alarm
1. Select Menu, scroll
to display Clock/Alarm and press Select.
2. Alarm is highlighted, press Select.
3. Press
or to display the alarm frequency you want: O, On once, On
daily, Mon to Fri or Sat & Sun then press
and enter the alarm time,
(you will also need to select AM or PM if you have set 12 hour format),
then press
to select the melody you want. Select Save.
To stop the alarm, press
or select Stop.
To activate a ten minute snooze, select Snooze or any other button
(except
or Stop). You can set snooze as many times as you want until
you select Stop.
Ifanincomingcallisreceivedwhilethealarmisgoingo,thealarm
noticationwillimmediatelystopandtheincomingcallwillbeshownon
the display. The alarm will not resume.