BT Synergy 6500 - Screensaver; Light Timeout


If you experience any problems, please call the Helpline on Freephone 0800 145 6789* or email 
When the screensaver is set to Clock
an analogue clock is displayed.
The screensaver comes on when
the screen backlight switches off
in standby mode. To change the
backlight timeout setting, see below.

1. Press Menu, scroll to Settings and press Select.
2. Set Handset is highlighted. Press Select.
3. Scroll
to Screensaver and press Select.
4. Scroll
or to set the Screensaver to Clock or Off.
5. Press Select to select Clock.
6. Press Back to return to the previous menu level.

1. Press Menu, scroll to Settings and press Select.
2. Set Handset is highlighted. Press Select.
3. Scroll
to Light Timeout and press Select.
4. Scroll
or
to set the timeout period you want then
press Select.
5. Press Back to return to the previous menu level.
Set how long the backlight stays on
after the last button press.