If you experience any problems, please call the Helpline on Freephone 0800 145 6789* or email
Use one handset to de-register
another. You cannot de-register the
handset you are using.
If your BT Synergy handset is registered to more than one base,
you can select which base to use.
1. Press Menu, scroll
or
to Registration and
press Select.
2. Scroll
to Select Base and press Select.
3. All base numbers are displayed. (In use) is added to bases
where the handset was previously registered to. Scroll
or
to the base you want and press Select.
4. Display shows Searching Base…. then the standby display
for that base.
1. Press Menu, scroll
or
to Registration and
press Select.
2. Scroll
to De-register and press Select.
3. Enter the system PIN and press OK.
4. Scroll
or
to the handset you want to de-register and
press Select.
5. Press Yes to conrm or No to cancel. The display conrms
de-registration.
6. Press Back to return to the previous menu level.
Internal calls
If you have more than one handset registered to the base, you can
make internal calls between two handsets.
1. Press
then the number (1-5) of the handset you want
to call.
2. Press OK to dial.
When an internal call is received,
the display shows Internal Call
Handset X (where X is the calling
handset) and the handset number.
If all handsets are on an internal call,
then any incoming external call will
be indicated by a tone in the earpiece
and the caller’s details will be shown
on the display (if you have subscribed
to a Caller Display Service, see
page 34).
Default PIN code = 0000
To Next Page
Loading...
