If you experience any problems, please call the Helpline on Freephone 0800 145 6789* or email
Only use rechargeable batteries as
specied in this guide.
2. Activate the batteries as described previously on page 7.
3. Place the handset on the charger to charge for at least 24
hours. When the handset is fully charged the
icon will
indicate that it is fully charged.
Your BT Synergy 6500 is ready for use.
Providing you have subscribed to your network’s Caller Display
service, the date and time is set automatically for all handsets
when you receive your rst call. The date and time is recorded
with each answering machine message you receive.
If you do not have a Caller Display service you can set the date
and time manually. Please see page 29 for these instructions.
If you ever need to remove the batteries, simply slide open the
battery compartment cover and pull the ribbon away from the
handset to release the batteries.
To Next Page
Loading...
