If you experience any problems, please call the Helpline on Freephone 0800 145 6789* or email
When you have more than one
handset registered to your base, you
can set one handset to ring before
the other handsets. This allows one
handset user to answer all incoming
calls rst, like a receptionist.
Choose All Handsets if you want
all handsets to ring at the same time
or Select Handset to nominate a
handset to ring two times before the
others.
The default setting is
All Handsets.
1. Press Menu, scroll
to Settings and press Select.
2. Scroll
to Set Base and press Select.
3. Scroll
to Ring Priority and press Select.
4. Press
or
to highlight All Handsets or Select
Handset then press Select.
If you choose Select Handset all available handsets are
displayed. Scroll
or
to highlight the handset you
want then press Select.
Scroll
or
to the number of rings you want to set 2, 4
or 6 and press Select.
5. Press Back to return to the previous menu level.
1. Press Menu, scroll to Settings and press Select.
2. Scroll
to Set Base and press Select.
3. Scroll
to Recall Mode and press Select.
4. Press
or
to highlight Timed Break or Earth then
press Select to conrm.
5. Press Back to return to the previous menu level.
1. Press Menu, scroll to Settings and press Select.
2. Scroll
to Set Base and press Select.
3. Scroll
to First Ring and press Select.
4. Press
or
to On or Off then press Select to conrm.
5. Press Back to return to the previous menu level.
If you have subscribed to your
network’s Caller Display service, your
BT Synergy does not ring until the
caller information has been received
and displayed.
However, if you want your handset
to ring without waiting for the caller
information to be displayed, set First
Ring to On. Please note that this will
mean the rst ring you hear will be
the default ringtone. This will change
to any ringtone you have set once the
caller information is displayed.
The default setting is ON.
To Next Page
Loading...
