If you experience any problems, please call the Helpline on Freephone 0800 145 6789* or email
You can set the time to either 12 or
24 hour format, see page 30.
If you subscribe to your network’s Caller Display service, the base
sets the date and time for all handsets whenever a call is received.
You can manually set the time on an individual handset.
1. Press Menu, scroll
to Clock & Alarm and press Select.
2. Date & Time is highlighted, press Select.
3. Enter the date using the format DD/MM/YY and press Save.
4. Enter the time and press Save.
5. Press Back to return to the previous menu level.
1. Press Menu, scroll to Clock & Alarm and press Select.
2. Scroll
to Alarm and press Select.
3. Press
or
to select On and press Select.
4. Press
or
to select Once, Mon-Fri or On Daily and
press Select.
5. Enter the time you want the alarm and press Save.
6. Press Back to return to the previous menu level.
1. Press Menu, scroll to Clock & Alarm and press Select.
2. Scroll
to Alarm and press Select.
3. Press
or
to select On or Off and press Select.
4. Press Back to return to the previous menu level.
When the alarm is set, the display
shows the
icon.
Each handset can have a different
alarm setting.
Once an alarm has been set, you can
switch the setting on or off.
If the alarm was set to Once the
will disappear from the screen.
If set to On Daily or Mon-Fri the
will remain on the screen.
If you are using the handset to make
a call when the alarm ring is due, the
ashes and you hear a beep in the
earpiece.
To Next Page
Loading...
