BT Synergy 6500 - Delete All Old Messages; Remote Access; Switch Remote Access PIN on or off; Change the Remote Access Security PIN


If you experience any problems, please call the Helpline on Freephone 0800 145 6789* or email 

If the memory is within 10 seconds of
becoming full while a caller is leaving
a message, they will hear, “ Please
complete your message within 10
seconds”. If they are still talking when
the memory becomes full the caller
hears, “Thank you for calling”, and
the machine will hang up.
The outgoing message will set
to Answer Only. You must delete
messages before your BT Synergy
6500 can record new messages.
During playback press Options then scroll
or
to: Pause, Repeat Message, Skip Forward, Skip
Backward, Delete.
4. Press Select to choose the highlighted option. At the end of
playback, press Back to return to the previous menu level.

1. Press Menu, scroll to Answer Machine and
press Select.
2. Scroll
to Delete Messages and press Select.
3. Display shows Delete all old messages? Press Yes to
conrm or No to cancel.
4. Press Back to return to the previous menu level.
Remote access
You can operate your answering machine from any Touchtone™
phone by calling your BT Synergy 6500 and entering a 4 digit
security code.

1. Press Menu, scroll to Answer Machine and
press Select.
2. Scroll
to Answer Settings and press Select.
3. Scroll
or
to Remote Access and press Select.
4. Scroll
or
to highlight On or Off and press Select.
5. Press Back to return to standby.

1. Press Menu, scroll to Answer Machine and press Select.
2. Scroll
to Answer Settings and press Select.
3. Scroll
or
to Remote Access and press Select.
4. Scroll
or
to highlight SET remote PIN and
press Select.

You should change the security PIN
from the original setting of 0000.
It is advisable to make a note of
your new PIN code and keep it
somewhere safe.