If you experience any problems, please call the Helpline on Freephone 0800 145 6789* or email
If the text is unsuccessful, the
message Unable to send will
be displayed.
In order to send and receive text
messages you must not withhold your
number. On most networks if you
normally withhold your number the
1470 prex presents your number
for you.
If you have two text phone base
stations plugged into one line, you
are likely to experience problems
receiving text messages. Normally,
only one SMS enabled base unit
(DECT or cordless) can be plugged
into any line.
If you do want to use two base units
and still receive written text you must
delete receive service centre number
from one of the base stations. To do
this on your BT Synergy, see page 52.
This will allow you to send text via
either base station but texts will only
be received on the product with the
active receive centre number.
If you want to keep more than one
text enabled phone connected, see
the alternative method on page 60
for instructions.
Your BT Synergy can store up to a
total of 50 short messages across all
handset Outboxes, Drafts boxes and
Inboxes.
Or scroll
or
to:
Save Press Select to save the message in
the Drafts folder.
Insert Symbol Press Select. The symbol table
is displayed.
Press
or
to highlight the symbol
you want then press Insert.
Insert Emoticon Press Select. The Emoticon table
is displayed.
Press
or
to highlight the
Emoticon you want then press Insert.
Insert Template Press Select. The list of templates
is displayed.
Press
or
to highlight the
Template you want then press Insert.
4. When sending a message, the display shows Sending
Message then Message Sent.
With standard text entry you can enter a word by pressing
each letter button a number of times to display the character you
want on the screen. For example, to write the word “Hello”,
press
twice, twice, three times, three times and
three times.
When you receive a new text message, the icon is displayed along
with You have X new messages.
1. The Inbox is opened and the list of messages displayed. If you
press Back the message is stored in the Inbox for reading later.
2. In the Inbox scroll
(to more recent messages) or (to
earlier list of messages) through the list of messages.
3. Highlight the message you want to read and press Read or
press Back to return to Text messaging menu.
4. Press
to return to standby.
To Next Page
Loading...
