BT Synergy 6500 - Base Settings; Base Ringtone; Base Ringer Volume; Dialling Mode


If you experience any problems, please call the Helpline on Freephone 0800 145 6789* or email 
Select from 5 base ringtones.
You will hear a sample ring for each
one you highlight (if the ringer is not
switched off).


1. Press Menu, scroll to Settings and press Select.
2. Scroll
to Set Base and press Select.
3. Ringtone is highlighted. Press Select.
4. Scroll
or
to highlight the ringtone you want.
5. Press Select to conrm.
6. Press Back to return to the previous menu level.

1. Press Menu, scroll to Settings and press Select.
2. Scroll
to Set Base and press Select.
3. Scroll
to Ringer Volume and press Select.
4. Press
or
to display the volume level you want and
press Select to conrm.
5. Press Back to return to the previous menu level.

1. Press Menu, scroll to Settings and press Select.
2. Scroll
to Set Base and press Select.
3. Scroll
to Dialling Mode and press Select.
4. Press
or
to highlight Pulse or Tone then press
Select to conrm.
5. Press Back to return to the previous menu level.
The base has 5 ringer volume settings
plus Off. The default setting is level 5.
Your BT Synergy is pre-set to Tone
dialling. You should not normally
need to change this setting. The dial
mode options are Tone (Time Break/
Earth) or Pulse (Earth).