BTech DMR-6X2 CodePlug Programming Guide
V-1.00/1.00
Page 11 of 30
© 2017/8 Trygve Svärd KD0PNQ
STEP 7 - CHANNEL – FREQUENCY SET-UP
The DMR-6X2 offers programming of 4,000 channels for UHF and VHF. To start double
click on the first line No.1 to open the Channel Information programming window for that
channel:
The Channel Information Edit window contains several options which will be explained
below:
Channel Name the name of the channel (typically name of repeater and TG)
Receive Freq. the VHF or UHF frequency
Transmit Freq. the VHF or UHF frequency
Channel Type Select Analog, Digital, Mixed Analog or Mixed Digital
Transmit Power Select one of four levels 6W/2.5W/1W/0.5W
Band Width Select the bandwidth of transmit
TX Permit: Selects PTT transmit criteria – typically Same ColorCode
Scan List Select which Scan List(s) will be scanned
TX Prohibit Check if the frequency is a listening channel only
Work Alone Check if the “alone” emergency function should be allowed
To Next Page
Loading...
