BTECH DMR-6X2 - Special Functions in DMR-6 X2; Extended Function List; Digital Simplex Repeat Function; Digital Simplex Repeater Setup

BTech DMR-6X2 CodePlug Programming Guide
V-1.00/1.00
Page 28 of 30
© 2017/8 Trygve Svärd KD0PNQ
6.0 Special Functions found in DMR-6X2
Some of the extended features described include:
- Simplex Repeater (Digital Mode)
- Talk Group change (on-the-fly)
- Priority Channel Scanning
6.1 Digital Simplex Repeat
This feature allows the DMR-6X2 to function as a Store and Forward Simplex Repeater.
A Simplex repeater records a transmission and stores it in memory. Immediately after
the incoming signal is dropped, the transmitter keys and retransmits the recorded audio
on the same frequency.
The DMR 6X2 also has the capability Cross Band VHF/ UHF repeat.
The repeat combinations can be any of the following:
Simplex VHF/ VHF UHF/ UHF VHF/UHF UHF/ VHF
Setup Procedure
Under Optional Settings / Auto Repeater
- Simplex Repeater > ON
- Simplex Relay Slot > CH Slot
- Spkr During RX of Repeater > ON or OFF
Off will mute the radios speaker.
Under Optional Settings / Record
- Assign Record Function to ON
Under Optional Settings / Key Function
- Assign a Programmable Key to “Simplex Repeater”.
Pressing the Key will turn the Repeat mode ON/OFF.
Program a channel as a Digital Simplex channel.
- Frequency TG = 99 CC = 1 TS = 1
- Do Not turn on Simplex TDMA
- Do Not turn on TDMA Adaptive
Operation
When Digital Simplex is turned on, a light blue icon will appear in
the upper bar of the LCD.