BTECH DMR-6X2 - GPS Ranging Functionality; Priority Channel Scanning; Priority Channel Scanning Setup

BTech DMR-6X2 CodePlug Programming Guide
V-1.00/1.00
Page 30 of 30
© 2017/8 Trygve Svärd KD0PNQ
6.3 Ranging
One of the five programmable key options can assigned as the
“Ranging” key. When pressed after receiving a call, the LCD will
initially display 2 screens while making a short GPS transmission.
After a few seconds it will then display the caller, direction and
distance of the incoming caller if both radios are receiving GPS
information.
The Optional / Settings tab:
- GPS = ON
- Get GPS Positioning = ON
- Ranging Intervals = 5
- Ranging Display = Feet
- GPS Template Info = ON
6.4 Priority Channel Scanning
When Creating a Scan List, there is an option to select two priority channels. These are
channels that scan between each of the normal scan channels. This is useful when
specifying a large number of scan channels.
Scan Channel 1
Priority 1
Scan Channel 2
Priority 1
Scan Channel 3
Priority 1