BTECH DMR-6X2 - Power on; Alert Tone; Display

BTech DMR-6X2 CodePlug Programming Guide
V-1.00/1.00
Page 15 of 30
© 2017/8 Trygve Svärd KD0PNQ
Wake Head Period Select the time for the preamble
Filter own ID in Miss Call Select Off or On then the radio will not remind of a miss call
when receiving a call with same ID.
Digital Remote Stun/Kill Select Off or On to allow remote shut-down of a radio
Digital Monitor Select Off or Single or Dual Slot to allow promiscuous mode
Digital Monitor CC Select Any or Same to allow same Color Code monitor
Digital Monitor ID Select Any or Same to allow monitor for a DMR ID
Monitor Slot Hold Select Off or On to monitor Slot continuously
Remote Monitor Select Off or On to allow other radio to check this radio
SMS Confirmation Select Off or On if you want to confirm a SMS
SMS Format Select Off or On to allow an SMS to be confirmed
recommend On if sending SMS
Radio Name DMR identification number
Radio ID User name or Call Sign
Power On
Power-on Interface Default, Custom Char, or Custom Picture at start-up
Power-on Display Char. Enter your unique characters for the start-up display
Power-on Password Select Off or On
Power-on Password Ch. Write in keyboard characters to unlock the radio
Alert Tone
SMS Alert Ring / None - Notification when receiving an SMS
Call Alert Ring / None - Notification when receiving a digital call
Dig Call Reset Tone Select Off / On - A digital call has a group call hold time
and a private call hold time to prevent voice missing after the call. When set Digi Call
Reset Tone is On, it will beep when the hold time terminates.
Call Tone Select if you want a tone confirming Digital and/or Analog
repeater connection at the start of a call
Key Tone Select Off or On if you want a tone when pressing a key
Idle Channel Tone Select Off or On if you want a tone when a channel is idle
Startup Sound Select Off or On if you want a tone when powering on
Volume Change Prompt Select Off or On to show a volume screen when changed
The programming also allows you to program the tone frequency for the Idle Channel
Tone, the Call Tone and the Call Reset Tone as well as the duration of those tones.
Display
Brightness Sets the display brightness – 5 is the brightest
Auto Backlight Duration Sets the time the display is on or “Always”
Menu Exit Time(s) Set the time the Menu selection is left on - minimum 5 sec
Time Display Select On to show current time, or Off
Last Caller Select Display ID, Caller, or Both