BTECH DMR-6X2 - CPS Programmer Helper for DMR-6 X2; CPS Programmer Overview; Uploading DMR Database

BTech DMR-6X2 CodePlug Programming Guide
V-1.00/1.00
Page 27 of 30
© 2017/8 Trygve Svärd KD0PNQ
5.0 CPS Programmer – Programming Software Helper for DMR-6X2
The DMR-6X2 has the ability to hold and display the information on up to 150K DMR
stations. One source of the required database information can be obtained from
http://www.amateurradio.digital/
By selecting either BTech DMR-6X2 or the D868UV, you will be able to download the
entire DMR ID database formatted for direct entry to the radio.
To upload the formatted DMR DB:
- Select Tool / Import from the top menu.
- Select Digital Contact List
- Point the software to the downloaded database file.
- Select Import This will load the DB to the software image.
Once loaded, you now need to send the DB to the radio.
- Select Program / Write to Radio
- When the Read/Write Objects box appears, Check the Digital
Contact List box. This is a large database that will take a few
minutes to load. A display sample is shown on the right.