BTECH DMR-6X2 - Creating Analog Zones and Channels; Analog Zone and Channel Creation; Step 9: Analog Address Book Setup; Analog Address Book Setup

BTech DMR-6X2 CodePlug Programming Guide
V-1.00/1.00
Page 18 of 30
© 2017/8 Trygve Svärd KD0PNQ
CREATE ANALOG ZONE AND CHANNELS
Create a zone(s) for your analog channels, then add the desired repeater or simplex
combinations. Name your zone accordingly. Optionally you can also create scan lists for
your analog channels and assign a scan list to a group of channels or an entire zone.
STEP 9 - ANALOG ADDRESS BOOK
The radio allows a set of addresses for the Analog mode. Open the Analog Address
Book and click on the first line to open the Analog Address Book Edit window.
The Call ID reference the DTMF or 5Tone number programmed under its menu
STEP 10 - PREFABRICATED SMS