BTECH DMR-6X2 - Power Save; Key Function; Other; Digital Functions

BTech DMR-6X2 CodePlug Programming Guide
V-1.00/1.00
Page 14 of 30
© 2017/8 Trygve Svärd KD0PNQ
Power Save
Auto Shutdown Select Off or minutes before auto shut-down
Power Save Select Off or 1:1 or 2:1 for saving power
Key Function
Key Lock Select Manual or Auto key lock function
PF1 Short Key Select from function list for the radio key below PTT
PF2 Short Key Select from function list for the radio key 2 below PTT
PF3 Short Key Select from function list for the orange radio key
P1 Short Key Select from function list for the P1 radio key
P2 Short Key Select from function list for the P2 radio key
PF1 Long Key Select from function list for the radio key below PTT
PF2 Long Key Select from function list for the radio key 2 below PTT
PF3 Long Key Select from function list for the orange radio key
P1 Long Key Select from function list for the P1 radio key
P2 Long Key Select from function list for the P2 radio key
Long Key Time Select time in seconds to hold the key for Long duration
Other
TOT Tx Time Out Timer. Off, 30s, 60s > 240s
Frequency Step In VFO mode, selects the frequency steps
Language English
SQL Level A Squelch level for the “upper” channel – set at 1
SQL Level B Squelch level for the “lower” channel – set at 1
TBST Tone Burst - 1000, 1450, 1750, 2100Hz repeaters
PTT + PF1 key to send tone!
Select TX Contact When On, the radio DMR ID can be changed from keyboard
Analog Call Hold Time Select how long a call is held for Analog reception.
Call Channel maintained Off / On - Allows a transmit on the sub-channel B if done
within 5 seconds after the call carrier was dropped.
Show Last Call on Launch Off / On
Priority Zone A Select Off or the zone that should become priority
Priority Zone B Select Off or the zone that should become priority
Digital Functions
Group Call Hold Time Select hang time for a Group Call
Personal Call Hold Time Select hang time for a Private Call
Prewave Time Select the time to wake-up the radio from a power save