BTech DMR-6X2 CodePlug Programming Guide
V-1.00/1.00
Page 7 of 30
© 2017/8 Trygve Svärd KD0PNQ
Scan List Name Name given to group of scanned channels
Available Channels Will list the channels available to scan
Scan Channel Member List of channels to be scanned
Priority Channel select Select the priority channel or off
Priority Channel 1 Sets which channel is priority 1
Priority Channel 2 Sets which channel is priority 2
Revert Channel During scanning, if no station is being received, pressing
the PTT will transmit on this channel.
Look Back Time A During scanning, it will scan the priority channel when
check the look back time A every time.
Look Back Time B (Analog only) During scanning, when the priority channel
has signal but with incorrect CTCSS/DCS, it will scan the
priority channel when check the look back time B every
time.
To Next Page
Loading...
