Bucher Municipal
V Range
Routine Maintenance
125
V50 • V65 • V80 Operator’s Guide
Service A - Every 500 Hours - To be carried out by workshop personnel.
1. Renew transmission pump filter.
2. Clean duct in body roof.
3. Check Supawash pump (if fitted) for correct operation of jets and any plunger seal
leaks. Service as necessary.
Service B - Every 1000 Hours - To be carried out by workshop personnel.
1. Carry out 500 hour service; plus
2. Renew hydraulic return filter element.
3. Renew water pump suction filters.
4. Change oil in ‘HYDRODRIVE’ gearbox.
5. Carry out a visual inspection for the security of body mounts, pivot pins and
equipment. - Ensure torque identification marks are aligned - re-torque as required
(See torque chart in maintenance manual)
Service C - Every 2000 Hours or 1 Year - To be carried out by workshop personnel.
1. Carry out 1000 hour service; plus
2. Clean suction filter and refill hydraulic reservoir.
3. Drain and refill Supawash pump (if fitted).
Vh - Single Engine
A
B
C
NOTICE
Used oils and filters should be disposed of in accordance with local waste disposal
regulations.