Buchi V-600 - 6 Operation; Operating V-600 Without Interface I-300;I-300 Pro; Operating V-600 with Interface I-300;I-300 Pro

BÜCHI Labortechnik AG Operation | 6
Operation Manual Vacuum Pump V-600 39/65
6 Operation
CAUTION
Risk of implosion of damaged glass components
Risk of injury from glass splinters and escaping fluids
u Always inspect all glass components for damage every time they are to be used.
CAUTION
Potential danger of inactive cooling during distillation
Risk of burns if solvent vapors are ignited
u Always monitor the function of the cooling system.
6.1 Operating V-600 without Interface I-300/I-300 Pro
If not controlled by an Interface I-300/I-300 Pro, the Vacuum Pump V-600 runs in con-
tinuous mode and switches to energy saving mode after one hour, see Chapter3.1
"Description of function", page11.
u To start the pump, switch on the master switch on the front of the V-600.
6.2 Operating V-600 with Interface I-300/I-300 Pro
The Vacuum Pump V-600 can also be externally controlled by an Interface I-300/
I-300 Pro. Control encompasses the following parameters and functions:
 Setting the required vacuum
 Timer
More information on overall control of distillation processes comprising the V-600 and
other laboratory equipment can be found in the operating instructions for the Interface
I-300/I-300Pro.