Extended functions
7
Logamatic 2107 controls - We reserve the right to make any changes due to technical modifications.34
Canceling a vacation program
The procedure for canceling a (currently) running vacation program and then
switching to normal heating mode is as follows:
z Open flap.
Temporarily interrupting a vacation program
Continuing a vacation program
+
Hold down the "Vacation" key and turn the dial until "VACATION 00" appears on
the display.
Release the "Vacation" key to store your input.
The normal heating program starts to work again in automatic mode.
or
Press the "Day mode" or "Night mode" key on the remote control of the particular
heating circuit (if installed), or the controls itself.
Press "AUT" to select automatic mode.
To Next Page
Loading...
Need help?
General
