In Operation | 7
0870215096_RA0760A_PLUS_-0001_IM_en 23 / 56
WARNING
The machine may start without notice.
Risk of severe injury!
As soon as the mode “Local/Auto” is activated:
• Make sure the machine is fully operational when the programmed schedule begins.
NOTE
Manual starts and stops.
The week planner still allows manual starts and stops.
7.1.3 Remote/Auto
The remote control mode is only available for “Role 2” people, this mode allows remote
control of the machine via an analog, digital or modbus input.
Control mode
Manual Auto
ModbusDigitalAnalog
Local
Remote
• Refer to the specific document “Pump Control Instructions, art. no.: 0870213261” for
more details or contact your Busch representative.