BW Broadcast TX-V2 - Page 59

Log: UDP
Enable system.logging.udp.active
Options: off, on
IP system.logging.udp.ip
Range: IPv4 address in the form aaa.bbb.ccc.ddd
Port system.logging.udp.port
Range: 1 to 10000
Diagnostics
DSPX Comm system.diagnostics.dspx
Options: Read only (OK, FAIL)
Exciter Comm system.diagnostics.exciter
Options: Read only (OK, FAIL)
Alarms DAC system.diagnostics.alarmsdac
Options: Read only (OK, FAIL)
Power DAC system.diagnostics.power.dac
Options: Read only (OK, FAIL)
59