BW Broadcast TX-V2 - Page 60

About
Product ID system.product.id
Range: Read only. Reads back the product ID (TXxxx) e.g.: ”TX50”.
Product Version system.product.version
Range: Read only. Reads back the product version (e.g.: ”3.3”).
Serial Number system.serial_number
Range: Read only. Reads back the Hardware version (e.g.: ”12”).
Hardware Version system.hardware.version
Range: Read only. Reads back the Software version (e.g.: ”1.5”).
Software Version system.software.version
Range: Read only. Reads back the serial number (e.g.: ”1045”).
Control Version system.control.version
Range: Read only. Reads back the Control version (e.g.: ”1.0”).
AIO FW Version system.aio_fw.version
Range: Read only. Reads back the Software version (e.g.: ”1.5”).
Reboot
Reboot system.reboot
Options: yes (to perform the reboot). Note that the unit will close the Telnet connection. You
will need to reconnect after a few seconds to allow the unit to reboot.
60