GasAlertMax
Activating the Detector
11
D1430/2 English
MultiMediaCard icon S is displayed continuously on Black
Box Dataloggers and when card is present in User
Downloadable Dataloggers.
Datalogger Operation
Datalogger operation is automatic and requires no settings.
Black Box Datalogger
The “Fail”, “Alarm” and card icons will blink if the card
malfunctions or is removed.
User Downloadable Datalogger Test
The detector tests the data card. The display advises if the
card is present and ready for use.
If the card is missing or malfunctioning, the detector beeps
and flashes quickly. The display advises card error and the
detector continues the self-test and proceeds to normal
operation.
The detector does not require the data card to be present or
functioning to operate.
Removing the card will cause a “Card
Out” message and a brief alarm.
Inserting the card will cause a “Card
In” message and a beep.
Add or change the data card on User Downloadable units at
any time. The detector supports card insertion and removal
while instrument is active.
To Next Page
Loading...
