BWT Manager Connect Duo User Manual

92 pages

To Next Page

To Previous Page

UNIVERS

2023/03 - Revision index: A - Code: 0000139233

4. Drill holes in the wall where the cabinet is to be mounted, corresponding to the diameter of the dowels

and respecting the centre distances specified in paragraph 3.3: 2 holes for the free standing bracket,

4 holes for the pre-mounted panel version

5. Insert the dowels with a hammer, then fix the base or panel by giving only a few turns to each screw

6. Once all the screws are in place, tighten them crosswise

Questions and Answers:

Need help?

Do you have a question about the BWT Manager Connect Duo and is the answer not in the manual?

General