BWT Manager Connect Duo User Manual

UNIVERS
42
2023/03 - Revision index: A - Code: 0000139233
14. Alarms
Alarm
Display
Actions
Level in product storage bin
- Push to open Alarm Relay
- Refill the product level in the relevant tank
Out of measurement limits
- Check and if necessary replace the relevant
measuring probe
- Push to open Alarm Relay
OFA pre-alarm (time ≥70%)
- Press to acknowledge the alarm.
OFA alarm (time =100%)
- Press to acknowledge the alarm.
Flow rate for water
- Restore the water flow to a sufficient level
Calibration
- Replace the relevant probe or buffer solution
and recalibrate
System Error
- Press to acknowledge the alarm.
Outside the dosage threshold
- Change the concentration of the parameter
(pH, Redox) for the pool water.
Extreme values that can be set for the alarms of the different measured parameters
n
Parameter
Limits
1
Temp. Measure min
+10°C
2
Temp. Measure Max
+38°C
3
pH Measure min
6 pH
4
pH Measure Max
8 pH
5
ORP Measure min
+600 mV
6
ORP Measure Max
+800 mV
7
CL Measure min
0,50 ppm
8
CL Measure Max
2.00 ppm

BWT Manager Connect Duo Specifications

General

Brand	BWT
Model	Manager Connect Duo
Category	Controller
Language	English