4-5 Use of driver assistance functions
Cancel/turn off the cruise control
■ Fully depress the brake pedal;
■ Press “Cancel” button on the steering wheel.
■ Press “Cruise” master button.
■ Exit “D” position.
● When “Cruise” master button is not turned off, if the driving speed is greater than
40km/h after canceling the cruise control, the cruise control can be resumed by
pressing “+Reset” button.
● When the acceleration is exceeded, the cruise control will be exited temporarily; when
the throttle pedal is released, the cruise control will be resumed automatically.
● When driving up and down roads, the set speed cannot be maintained with the cruise
control.
Configuration 2
Turn-on/turn-off of cruise control
system
■ Start the vehicle, shift to gear D,
and press the cruise control switch
. In such case, the indicator
lamp on the combination
instrument turns on.
■ Press the cruise control switch
again or turn off the vehicle power
supply to turn off the cruise control
system.
Set
When the vehicle speed exceeds the preset speed, press the Set button to set the
current vehicle speed as target cruise control system. In such case, the “SET” indicator
lamp on the instrument turns on to indicate the successful setting.
To Next Page
Loading...
