4-5 Use of driver assistance functions
■ The camera has a limited field of view. The objects at the corners on both sides of the
bumper or below the bumper are not visible on the reversing image, and the objects on
the front of the car and the rear right middle of the car are not visible on the front right
image, as shown below:
The object is near the corner of the
bumper, in the middle of the body or in
front of the body.
The object is below the rear bumper
■ The parking image system should be activated when the car is parked.
■ The front right image mode can be started directly if the car is not revered. The car can
be slowly approached to the position to be parked by directly observing the
surrounding environment and the image system.
■ If the start button is turned to “OK” position and the shift lever is turned to “R” position,
the reverse image mode will be activated; if pressing “ ” button on the steering
wheel, the reverse image mode and the front right image mode will be switched
cyclically.
To Next Page
Loading...
Need help?
General
