Charge system warning indicator
■ The indicator is used to indicate a charge system fault during the charge process.
■ The indicator is used to indicate a discharge system fault during the discharge
process.
■ The indicator is used to indicate the operating status of DC module and battery module
when the charge or discharge operation is not performed.
■ If the indicator is turned on during driving process, there may be a fault from DC
system or battery system. It is recommended to turn off the air conditioning, fan, radio,
and etc. and drive the car directly to the nearest BYD Auto Authorized Service Station
for repair.
Power battery overheat warning indicator
■ If the indicator is turned on, it indicates that the power battery temperature is too high
and should be parked for cooling.
■ The power battery may be overheated under the following operating conditions, such
as:
● Long-time long-distance climbing under hot conditions.
● Long-time intermittent driving, frequent acceleration and sudden braking, or
long-period driving.
Power battery fault warning indicator
■ When the power supply is in “OK” position, the warning indicator will be turned on. If
the power battery system is operated normally, the indicator will be turned off after a
few seconds. If the system is faulty, the indicator will be turned on again. It is
recommended to contact BYD Auto Authorized Service Station for inspection
immediately.
■ In any of the following cases, it indicates that a component monitored with the warning
indicator system is faulty, it is recommended to contact BYD Auto Authorized Service
Station for inspection as soon as possible.
● When the power supply is in “OK” position, the indicator will be always on.
● If the indicator is always on or flashes during driving process.
To Next Page
Loading...
