When the light knob is turned to the
“ ” position, the low beam lights will
be turned on.
■ With the lighting knob at “ ”
position, push forward (away from
the steering wheel) the lighting
combination switch handle from
initial position and release. In such
case, the handle returns by self to
initial position, the high beam turns
on, and the high beam indicator
lamp on the instrument also turns
on.
■ Operating the lighting handle
“forward/backward” can turn off the
low beam or exit the “OK” position
and turn off the high beam.
Overtaking light
■ When the light handle on the
combination switch is pulled back
from the original position (close to
the steering wheel), the overtaking
light will be turned on; when it is
released, the light handle on the
combination switch will be reset
automatically and the overtaking
light will be turned off. Pull
backward (Towards the steering
wheel) and hold the lighting handle.
The overtaking lamp keeps on once
this handle is pulled backward and
held.
■ When the lighting knob is at “○”, the overtaking lamp can also be turned on. Releasing
or exiting the “OK” will turn off the overtaking lamp.
To Next Page
Loading...
Need help?
General
