Turn signal
■ When the light handle on the
combination switch is push upward,
the right turn signal and the turn
indicator on the dashboard will flash
at the same time.
■ When the light handle on the
combination switch is pulled down,
the left turn signal and the turn
indicator on the dashboard will flash
at the same time.
When it’s pushed to the topmost or bottommost position, the turn signal lamp keeps
flashing, even if it’s released. The turn signal lamp turns off automatically after the
cornering is completed.
Configuration 2
When the light knob is turned to “ ”
position, all lights will be turned off.
When the lighting knob is rotated to
“ “ position (if fitted), the low beam
and the marker lamp will be turned on or
off automatically based on the lighting
intensity detected by the lighting
intensity sensor.
The lighting intensity sensor is located at the top of the dashboard; do not cover it or
splash any liquid on it.
To Next Page
Loading...
