When the light knob is turned to “ ”
position, the small lights (including the
front position lights, rear position lights,
rear license plate light, instrument
backlight, small light indicator and some
backlights, and etc.) will be turned on.
When the light knob is turned to the
“ ” position, the low beam lights will
be turned on.
With the lighting knob at “ “ position,
push forward (away from the steering
wheel) the lighting combination switch
handle from initial position and release.
In such case, the handle returns by self
to initial position, the high beam turns
on, and the high beam indicator lamp on
the instrument also turns on. Operating
the lighting handle “forward/backward”
can turn off the low beam or exit the
“OK” position and turn off the high
beam.
Overtaking light
■
When the light handle on the
combination switch is pulled back
from the original position (close to
the steering wheel), the overtaking
light will be turned on; when it is
released, the light handle on the
combination switch will be reset
automatically and the overtaking
light will be turned off.
■
When the lighting knob is at “ ”,
the overtaking lamp can also be
turned on.
To Next Page
Loading...
