■ If the switch knob is turned up to the
rear wiper position “ ”, the rear
windshield wiper and scrubber will
be operated simultaneously, and the
working time is related to the holding
time of the switch knob at the
position.
■ Rotate downward the switch knob to
rear wiper position to run both
rear windscreen wiper and scrubber
simultaneously. Upon release, this
switch returns automatically and
both rear windscreen wiper and
scrubber stop working
simultaneously.
● Regularly inspect the wiper blade and remove the dirt attached on the wiper blade,
to prevent dry operation.
● If the wiper is turned on just at beginning of rain, because the rainwater is mixed with
sand and dust, not only the sand and dust on the windshield cannot be cleaned, but
a blurred vision may be formed instantly, which may affect the safety of driving.
● Please use the glass cleaner. The water or any other detergent may cause damage
to the scrubber motor.
To Next Page
Loading...
Need help?
General
